921-178-3789, New Delhi, Delhi
GST No. 07ATGPD2350R1ZH
Call 08048600099 61% Response Rate
Distributors of Parker Products in India. We Supply Best Parker Hydraulics, Parker Hoses Parker Ermeto Fittings, Parker Valves, Parker Tube, Parker Pneumatic, Distribution offers the next level in premier customer service. Each location has significant on-hand inventory to keep your down time to a minimum. And many distributors have inhouse design capability to support your system and subsystem requirements.
Distributors of Parker Products in India. We Supply Best Parker Hydraulics, Parker Hoses Parker Ermeto Fittings, Parker Valves, Parker Tube, Parker Pneumatic, Distribution offers the next level in premier customer service. Each location has significant on-hand inventory to keep your down time to a minimum. And many distributors have inhouse design capability to support your system and subsystem requirements.
Distributors of Parker Products in India. We Supply Best Parker Hydraulics, Parker Hoses Parker Ermeto Fittings, Parker Valves, Parker Tube, Parker Pneumatic, Distribution offers the next level in premier customer service. Each location has significant on-hand inventory to keep your down time to a minimum. And many distributors have inhouse design capability to support your system and subsystem requirements.
Minimum Order Quantity: 50 Piece
Material | SS |
Size | 1 inch, 1/2 inch, 3/4 inch |
Application | Gas Pipe, Hydraulic Pipe |
Brand | Parker |
Working Pressure | 160bar to 630bar |
Parker Hannifin, the world leader in drive and control technologies, has opened near Bielefeld a new technology and manufacturing center for high-quality piping connection systems. In this "Complete Piping Solution Center" (CPS Center), design solutions are developed for creating piping connection systems which find application in machinery construction, vehicle manufacture and shipbuilding, wind power and many other market segments. CPS Centers are already in operation in the USA, Norway and South Korea and there are plans for more locations in the Asia region. As the latest link in this chain, the operation in August dorf, near Bielefeld, belongs organizationally to the Tube Fittings Division Europe (TFDE), which has its headquarters in Bielefeld-Windelsbleiche.
Furthermore, this new CPS Center is situated in strategically favorable proximity to Parker''s central warehouse for Europe in Bielefeld-Oldentrup; this is the central hub for the warehousing and despatch of all Parker products throughout the whole of Europe. Under the world-famous brand name "Ermeto", classical DIN and SAE standard hydraulic connection systems, up to outside tube diameters of 42 mm (2 inches), are produced by the manufacturing locations of the Parker Tube Fittings Division Europe.
This new CPS Center represents an important addition to the core business. It is here that large-size pipes and flanges are designed, manufactured, connected into a complete system, delivered straight to the assembly point and finally assembled, all in accordance with customer requirements. Demand is increasing for comprehensive system solutions which go beyond the manufacture of individual component parts to include the important benefits arising from advisory services for the design, manufacture and installation of hydraulic piping systems.
From the customers'' viewpoint, their machinery is becoming ever more powerful and equipment manufacturers are under more pressure than ever from increasing costs and safety requirements. Equally important to manufacturers is the demand for space-saving hydraulic piping systems. With its new CPS Centers, Parker offers this in-demand service and can satisfy ever-increasing needs.
At the start of a project, Parker''s systems engineers establish the customer''s requirements and then on the basis of this, develop an application-specific pipe layout design complete with drawings and documentation.
After the customer''s approval, the pipes, with outside diameters up to 220 mm, are coldformed on the latest CNC bending machines. These enable bending radii of 2xD to 3xD to be achieved, depending on requirement. The finish-machined and cleaned pipes are then assembled in accordance with the customer''s requirements and delivered to the Parker central warehouse for onward dispatch.
If the customer requires, Parker experts will undertake the assembly, flushing out and final acceptance of the piping system. This kind of support from Parker gives customers the opportunity to significantly reduce their own personnel resources and thus save costs. So the Complete Piping Solutions concept constitutes a comprehensive system which in the fields of machinery construction, vehicle making and shipbuilding, as well as offshore applications, shows strong demand and has been widely applied. The customer of course will decide whether to take up the complete solution of have Parker carry out, for example, only the design or assembly. Customers and users can rely not only on the experience and expert know-how of Parker''s systems engineers and technicians, but also increase their productivity and significantly reduce design times.
View Complete details
Minimum Order Quantity: 10 Piece
Product Brochure
Fitting Type | Elbow |
Size | 3/4 inch |
Corrosion Resistance | YES |
Diameter | METRIC |
Grade | STEEL |
Part No. | PARKER ERMETO |
Port Size | METRIC, INCHE |
Head Code | Hexagonal |
Thread Type | METRIC, BSP |
Weld Type | WELD, FERRULE |
Features | PARKER HYDRAULIC |
Brand | Parker |
Pressure Rating | 600 BAR |
Is It ISO Certified | ISO Certified |
Item Code | EO ERMETO ORIGINAL |
Port Of Dispatch | GERMANY |
Packing Details | BOX |
Sizes Available | 6MM TO 42MM |
Application | Chemical |
Packaging Type | Box |
Material | Carbon Steel |
Additional Information:
View Complete details
Minimum Order Quantity: 50 Piece
Finishing | Polished |
Type | Ferrule Fittings |
Material | Steel |
Size | 1/4 Inch |
Brand | Parker |
Packaging Type | Box |
The new EO-3 tube fitting system from Parker Hannifin Corporation, global in motion and control technologies, utilizes new thread technology and a unique marking system to decrease installation time and cut down on tube system leaks due to improper installation. In contrast to Parker EO and EO-2 DIN standard fittings, the EO-3 system is based on a 24-degree inner cone with an integrated soft seal and cone-shaped connecting thread that improves sealing compatibility.
In addition, when a yellow signal ring is aligned, the installer can immediately see that the fitting has been installed correctly. Because of these features, EO-3 fittings can be installed considerably more quickly than conventional fitting systems. The EO-3 installation does not require a torque wrench or a wrench extension. For ease of installation in tight construction spaces, EO-3 fittings use an octagonal screw nut in tube sizes 25 mm and up instead of a standard hexagonal screw nut. The new EO-3 system is being demonstrated in the Parker exhibit at IFPE 2014, booth S-80440. EO-3 fittings meet the demands of applications that require both flexible hose connections and rigid tube work. They can link to existing EO-2 connections using an adapter, meaning that old fittings can be converted or upgraded at little additional cost.
The EO-3 Fitting System can be used in Applications such as:
View Complete details
Minimum Order Quantity: 5 Piece
Usage/Application | Hydraulic Pipe |
Material | SS |
Finishing | Polished |
Size | 1/2 inch, 3/4 inch |
Application | Structure Pipe, Gas Pipe, Hydraulic Pipe |
Type | Ermeto Fittings |
New Generation: High performance tube fittings. The new, chromium6-free fitting generation from Parker Ermeto is called EO-Plus for metallic sealed connections, EO2-Plus for Dry Technology systems and EO2-FORM for formed tube soft-sealed systems without cutting rings. The new generation is characterised by maximum safety even under extreme pressures of up to 800 bar nominal pressure.
The further development of the proven Dry Technology EO-2 concept is designated EO2-Plus and gives extremely high pressure ratings and greatly reduced tightening torques for the larger fitting sizes. EO2-FORM is the new high pressure tube connection from Parker Ermeto. This concept unites the advantages of welded connections with those of EO-2 technology proven worldwide in millions of applications.
The New Generation from Parker Ermeto clearly exceeds the performance requirements of DIN/ISO standards: with its guaranteed 4-fold design factor, the new fitting generation can be used at the following nominal pressures in steel:
This extraordinary pressure and assembly performance can only be achieved by the use of even better and more resistant materials in combination with a special coating of individual components. This greatly extends the application range and the user does not have to sacrifice any advantages. Thanks to the higher pressure levels, less expensive “L” series fittings can now be used instead of the heavier “S” series.
View Complete details
Minimum Order Quantity: 50 Piece
Product Brochure
Steel Grade | SS316L |
Usage/Application | Hydraulic Pipe |
Head Code | Hexagon |
Brand | Parker |
Material | Stainless Steel |
Hardness | 71 HRC |
We provide a wide range of industrial Parker Ermeto Fittings that are manufactured using highly flexible raw material that is procured from reliable vendors. These industrial hoses are resistant from all kinds of harsh treatment during their usage.
Additional Information:
View Complete details
Minimum Order Quantity: 50 Piece
Size | 1/2" |
Material | SS |
Brand | Parker |
Application | Hydraulic Pipe |
Pressure | Upto 500 Bar |
Packaging Type | Box |
Plain bearing rotary fittings for slow rotating, swinging or moving machine parts up to 40 bar (series L) or up to 100 bar (series S).
Flow Media: Hydraulic oils and lubricants on mineral oil base. Also for hydraulic fluids HETG and HEES. Not suitable for corrosive and HFC-fluids or gases.
Technical Specifications:
Materials: Casing, body nut and progressive ring of steel. Sealing of NBR (Perbunan), on request of FKM. Plain bearing rotary fittings are not available in stainless steel or brass.
View Complete details
Minimum Order Quantity: 100 Piece
Size | 3/4 inch |
Material | SS |
Application | Pneumatic Connections |
Brand | Parker |
Surface Finishing | Polished |
View Complete details
Minimum Order Quantity: 5 Piece
Size | 1/2, 1, 2 Inch |
Application | Hydraulic Pipe |
Material | SS |
Connection | Welded |
Head Code | Hexagonal |
Brand | Parker |
Parker offers fittings that provide leak free solutions. Fitting styles include Ball bearing rotary fittings are used for working pressures up to 250 bar. Favorable pressure/RPM ratio. Compact maintenance-free construction, service-proved. Combined ball and plain bearing with constant lubrication. Low starting torque. War-resistant annular piston sealings. Flow media: Hydraulic oils and lubricant on mineral oil base. Also for hydraulic HETG and HEES. Not suitable for corrosive and HFC-fluids or gases. Materials: Casing, body nut and progressive ring of steel, annular piston sealing: POM (e.g. Delrin)/FKM (e.g. Viton®). Eolastic sealing: NBR (e.g. Perbunan, also available in FKM. Surface: Zinc-plated with yellow chromate (A3C). Product range: Series L tube o.d. 6 to 35 mm Series S tube o.d. 6 to 38 mm Construction: 8 different versions with one rotational axis. Multiaxial rotary couplings on request. Tube connections according to DIN 2353, series S. Maximum working pressure 250 bar (peak pressure). Male stud sealing by Eolastic seals of NBR. Male sutd with metric parallel or BSPP thread Nominal.
View Complete details
Minimum Order Quantity: 25 Piece
Product Brochure
End Connection Type | Buttweld |
Application | Structure Pipe, Hydraulic Pipe, Gas Pipe |
Packaging Type | Box |
Material | Steel |
Size | 3/4 inch |
Conical Connection Enables Seamless Installation:
Machine Pipe Forming with Proven Technology:
Ability to be Combined and Flexible Employment:
Benefits of the new Concept at a Glance:
View Complete details
Minimum Order Quantity: 100 Piece
Material | STEEL, STAINLESS STEEL |
Size | 6MM TO 42MM |
Type Of Pipes | SEAMLESS |
Usage/Application | Hydraulic Pipe |
Type | HIGH PRESSURE HYDRAULIC TUBE & FITTINGS |
Application | Chemical Fertilizer Pipe, Gas Pipe, Hydraulic Pipe, Pneumatic Connections |
Thread Size | 1/4 to 2 inch |
Brand | Ermeto-EO |
Pressure Rating | 600 BAR |
Connection | Male,Female |
Ermeto DIN Male Stud High Pressure Hydraulic Tube Fittings The main function of Ermeto DIN male stud high pressure hydraulic tube fittings is to connect different numbers of tubes and hoses. This broad range of fittings is available in steel with Cr(VI)-free surfaces and in stainless steel Ermeto DIN Banjo FittingsThe main function of Ermeto DIN banjo fittings is to connect different numbers of tubes or hoses. This broad range of DIN fittings is available in steel with Cr(VI)-free surfaces and in stainless steel.Ermeto DIN Fitting Components For High Pressure Hydraulic Tube Fittings
Ermeto DIN fitting components for high pressure hydraulic tube fittings are indispensable items in order to build up a complete fitting series (EO-PSR, EO-2, EO2-FORM).Ermeto DIN Locknut Adjustable High Pressure Tube Fittings The main function of Ermeto DIN locknut adjustable high pressure tube fittings is to connect different numbers of tubes or hoses. This broad range of fittings isvailable in steel with Cr(VI)-free surfaces and in stainless steel.Ermeto DIN Non Adjustable High Pressure Tube Fittings
The main function of Ermeto DIN non adjustable high pressure tube fittings is to connect different numbers of tubes or hoses. This broad range of fittings is available in steel with Cr(VI)-free surfaces and in stainless steel Plugs For Ermeto DIN High Pressure Hydraulic Fittings
The main function of plugs for Ermeto DIN high pressure hydraulic fittings is the safe closure of ports in hydraulic systems. This broad range of fittings is available in steel with Cr(VI)-free surfaces and in stainless steel.Ermeto High Pressure Hydraulic Reducing Weld Nipple
Ermeto reducing weld nipples are suitable for all popular weld fittings and meet the stringent requirements which are placed on individual components in complex welding procedures.Ermeto DIN Tube To Tube Swivel High Pressure Hydraulic Tube Fittings
The key function of Ermeto DIN tube to swivel high pressure hydraulic tube fittings is to connect different numbers of tubes or hoses. The fittings are available in steel with Cr(VI)-free surfaces and stainless steel.Ermeto DIN Tube To Tube High Pressure Hydraulic Tube Fittings The main function of Ermeto DIN tube to tube high pressure hydraulic tube fittings is to connect different numbers of tubes. This broad range of fittings is available in steel with Cr-(VI)-free surfaces and in stainless steel.Ermeto High Pressure Hydraulic Weld NippleThe wide Ermeto fitting range allows welded tube connections. Therefore, the weld nipple has to be welded onto the tube end. Using the standard Ermeto nut, this weld nipple can then be connected to the tube joint of any Ermeto tube fitting.Ermeto DIN Port Reducers For High Pressure Hydraulic Tube Fittings
The main function of Ermeto DIN port reducers is to match the sizes of different ports. This range of port reducers is available in steel with Cr(VI)-free surfaces and stainless steel.Ermeto High Pressure Hydraulic Tube Bend Weld NippleErmeto tube bend weld nipples are suitable for all popular weld fittings and meet the stringent requirements which are placed on individual components in complex welding procedures.
View Complete details
Minimum Order Quantity: 100 Piece
Size | 1/2, 3/4, 1 Inch |
Usage/Application | Gas Pipe, Hydraulic Pipe, Chemical Fertilizer Pipe |
Brand | Ermeto Original ( EO), Ermeto original |
Material | SS |
Connection Type | Welded, Male, Female |
View Complete details
Minimum Order Quantity: 5 Piece
Usage/Application | Structure Pipe, Gas Pipe |
Size | 1/4-3 Inch |
Brand | Parker |
Shape | Hexagonal |
Material | SS |
Packaging Type | Carton Box |
We are a renowned organization offering a comprehensive range of PARKER Hydraulic Fittings that is sourced from reputed manufacturers. These are extensively appreciated for superior performance, optimum functionality, durable finish standards and extended serviceability. Moreover, we also offer these at competitive prices. These hydraulic fittings can also be customized as per the specifications given by our clients. The product range comprises
Male stud coupling | Run tee | Elbow |
Male stud elbow | Straight nipple | High pressure Benjo |
Male stud run tee | Swivel elbow | Equal cross |
Weld type nipple | Swivel tee | Lock nut |
Bulkhead type union | Swivel union | Ferrules |
View Complete details
Minimum Order Quantity: 50 Piece
Size | 3/4 inch |
Application | Gas Pipe |
Thread Size | 1/8,1/4,3/8,1/2,3/4 inch |
Material | SS |
Work Temperature | -20 Deg C To 120 Deg C |
Working Pressure | 2.5 MPa |
The new EO-3 tube fitting system from Parker Hannifin Corporation, global in motion and control technologies, utilizes new thread technology and a unique marking system to decrease installation time and cut down on tube system leaks due to improper installation. In contrast to Parker EO and EO-2 DIN standard fittings, the EO-3 system is based on a 24-degree inner cone with an integrated soft seal and cone-shaped connecting thread that improves sealing compatibility. In addition, when a yellow signal ring is aligned, the installer can immediately see that the fitting has been installed correctly. Because of these features, EO-3 fittings can be installed considerably more quickly than conventional fitting systems. The EO-3 installation does not require a torque wrench or a wrench extension. For ease of installation in tight construction spaces, EO-3 fittings use an octagonal screw nut in tube sizes 25 mm and up instead of a standard hexagonal screw nut. The new EO-3 system is being demonstrated in the Parker exhibit at IFPE 2014, booth S-80440. EO-3 fittings meet the demands of applications that require both flexible hose connections and rigid tube work. They can link to existing EO-2 connections using an adapter, meaning that old fittings can be converted or upgraded at little additional cost.
The EO-3 Fitting System can be used in Applications such as:
View Complete details
Minimum Order Quantity: 10 Piece
Material | SS |
Size | 1/2 inch, 3/4 inch |
Application | Structure Pipe |
Brand | Parker |
Packaging Type | Box |
Additional Information:
View Complete details
Minimum Order Quantity: 50 Piece
Size | 1/4 Inch |
Head Code | Hexagon |
Brand | Parker |
Working Pressure | 2.5MPa |
Material | SS |
The new EO-3tube fitting system from Parker Hannifin Corporation, global in motion and control technologies, utilizes new thread technology and a unique marking system to decrease installation time and cut down on tube system leaks due to improper installation. In contrast to Parker EO and EO-2 DIN standard fittings, the EO-3 system is based on a 24-degree inner cone with an integrated soft seal and cone-shaped connecting thread that improves sealing compatibility. In addition, when a yellow signal ring is aligned, the installer can immediately see that the fitting has been installed correctly. Because of these features, EO-3 fittings can be installed considerably more quickly than conventional fitting systems. The EO-3 installation does not require a torque wrench or a wrench extension. For ease of installation in tight construction spaces, EO-3 fittings use an octagonal screw nut in tube sizes 25 mm and up instead of a standard hexagonal screw nut. The new EO-3 system is being demonstrated in the Parker exhibit at IFPE 2014, booth S-80440. EO-3 fittings meet the demands of applications that require both flexible hose connections and rigid tube work. They can link to existing EO-2 connections using an adapter, meaning that old fittings can be converted or upgraded at little additional cost.
The EO-3 Fitting System can be used in Applications such as:
View Complete details
Minimum Order Quantity: 50 Piece
Finishing | Polished |
Connection | Welded |
Application | Gas Pipe, Hydraulic Pipe, Chemical Fertilizer Pipe |
Size | 1/4 inch |
Type | Ferrule |
Brand | Parker |
Material | SS |
The new EO-3® tube fitting system from Parker Hannifin Corporation, global in motion and control technologies, utilizes new thread technology and a unique marking system to decrease installation time and cut down on tube system leaks due to improper installation. In contrast to Parker EO and EO-2 DIN standard fittings, the EO-3 system is based on a 24-degree inner cone with an integrated soft seal and cone-shaped connecting thread that improves sealing compatibility. In addition, when a yellow signal ring is aligned, the installer can immediately see that the fitting has been installed correctly. Because of these features, EO-3 fittings can be installed considerably more quickly than conventional fitting systems.
The EO-3 installation does not require a torque wrench or a wrench extension. For ease of installation in tight construction spaces, EO-3 fittings use an octagonal screw nut in tube sizes 25 mm and up instead of a standard hexagonal screw nut. The new EO-3 system is being demonstrated in the Parker exhibit at IFPE 2014, booth S-80440. EO-3 fittings meet the demands of applications that require both flexible hose connections and rigid tube work. They can link to existing EO-2 connections using an adapter, meaning that old fittings can be converted or upgraded at little additional cost.
The EO-3 Fitting System can be used in Applications such as:
Additional Information:
View Complete details
Minimum Order Quantity: 50 Piece
Size | 1/2 inch, 3/4 inch, 1 inch |
Application | Structure Pipe, Gas Pipe, Hydraulic Pipe |
Head Code | Hexagonal |
Brand | Parker |
Material | SS |
Pressure | 500 Bar |
Parker Hannifin, the world leader in drive and control technologies, has opened near Bielefeld a new technology and manufacturing center for high-quality piping connection systems. In this "Complete Piping Solution Center" (CPS Center), design solutions are developed for creating piping connection systems which find application in machinery construction, vehicle manufacture and shipbuilding, wind power and many other market segments. CPS Centers are already in operation in the USA, Norway and South Korea and there are plans for more locations in the Asia region. As the latest link in this chain, the operation in Augustdorf, near Bielefeld, belongs organisationally to the Tube Fittings Division Europe (TFDE), which has its headquarters in Bielefeld-Windelsbleiche.
Furthermore, this new CPS Center is situated in strategically favourable proximity to Parker''s central warehouse for Europe in Bielefeld-Oldentrup; this is the central hub for the warehousing and despatch of all Parker products throughout the whole of Europe. Under the world-famous brand name "Ermeto", classical DIN and SAE standard hydraulic connection systems, up to outside tube diameters of 42 mm (2 inches), are produced by the manufacturing locations of the Parker Tube Fittings Division Europe. This new CPS Center represents an important addition to the core business. It is here that large-size pipes and flanges are designed, manufactured, connected into a complete system, delivered straight to the assembly point and finally assembled, all in accordance with customer requirements.
Demand is increasing for comprehensive system solutions which go beyond the manufacture of individual component parts to include the important benefits arising from advisory services for the design, manufacture and installation of hydraulic piping systems. From the customers'' viewpoint, their machinery is becoming ever more powerful and equipment manufacturers are under more pressure than ever from increasing costs and safety requirements. Equally important to manufacturers is the demand for space-saving hydraulic piping systems. With its new CPS Centers, Parker offers this in-demand service and can satisfy ever-increasing needs.
At the start of a project, Parker''s systems engineers establish the customer''s requirements and then on the basis of this, develop an application-specific pipe layout design complete with drawings and documentation. After the customer''s approval, the pipes, with outside diameters up to 220 mm, are coldformed on the latest CNC bending machines. These enable bending radii of 2xD to 3xD to be achieved, depending on requirement.
The finish-machined and cleaned pipes are then assembled in accordance with the customer''s requirements and delivered to the Parker central warehouse for onward despatch. If the customer requires, Parker experts will undertake the assembly, flushing out and final acceptance of the piping system. This kind of support from Parker gives customers the opportunity to significantly reduce their own personnel resources and thus save costs. So the Complete Piping Solutions concept constitutes a comprehensive system which in the fields of machinery construction, vehicle making and shipbuilding, as well as offshore applications, shows strong demand and has been widely applied. The customer of course will decide whether to take up the complete solution of have Parker carry out, for example, only the design or assembly. Customers and users can rely not only on the experience and expert know-how of Parker''s systems engineers and technicians, but also increase their productivity and significantly reduce design times.
View Complete details
Minimum Order Quantity: 100 Unit
Usage/Application | Hydraulic Pipe |
Finishing | Polished |
Size | 1/4 Inch |
Head Code | Hexagonal |
Material | Steel |
The new EO-3® tube fitting system from Parker Hannifin Corporation, global in motion and control technologies, utilizes new thread technology and a unique marking system to decrease installation time and cut down on tube system leaks due to improper installation. In contrast to Parker EO and EO-2 DIN standard fittings, the EO-3 system is based on a 24-degree inner cone with an integrated soft seal and cone-shaped connecting thread that improves sealing compatibility. In addition, when a yellow signal ring is aligned, the installer can immediately see that the fitting has been installed correctly. Because of these features, EO-3 fittings can be installed considerably more quickly than conventional fitting systems. The EO-3 installation does not require a torque wrench or a wrench extension. For ease of installation in tight construction spaces, EO-3 fittings use an octagonal screw nut in tube sizes 25 mm and up instead of a standard hexagonal screw nut. The new EO-3 system is being demonstrated in the Parker exhibit at IFPE 2014, booth S-80440. EO-3 fittings meet the demands of applications that require both flexible hose connections and rigid tube work. They can link to existing EO-2 connections using an adapter, meaning that old fittings can be converted or upgraded at little additional cost.
The EO-3 Fitting system can be used in Applications such as:
View Complete details
Material | SS |
Size | 1/2 inch, 3/4 inch |
Application | Structure Pipe, Gas Pipe |
Pack Type | Box |
Brand | Parker |
View Complete details
Minimum Order Quantity: 50 Piece
Brand | Parker |
Material | Brass |
Size | 1/2" to 1" |
Working Temperature | -50 deg C-120 deg C |
Technics | Forged |
Advantages:
Specifications:
Applications:
Working Pressure and Temperature Ranges
Vibration:
View Complete details
Brand | Parker |
Usage/Application | Hardware Fitting |
Material | Brass |
Size | 1/2-2 inch |
Head Shape | Round |
Pack Type | Carton Box |
Design criteria require any fitting to achieve two functions – it must both seal against leaks and mechanically hold against system pressure. Unlike flare fittings which achieve both functions at the flare, flareless fittings are more complex. Sealing must be achieved at a minimum of two points (more in the case of two ferrules). First, a line contact seal must be "coined" between the contact point of the ferrule and the internal body seat. Second, a "bite" seal deep enough to penetrate surface scratches on the tube, must be established between the ferrule and the tube. Mechanical holding power is achieved by the "bite" into the tube causing displaced metal to be pushed up into a "wall" ahead of the bite.
This "wall" prevents the tube from blowing out. The amount of force that is acting to push the tube out is calculated by multiplying system pressure by the cross section area of the tube. For example, blowout force on a 1/2" OD tube at 1000 psi static pressure is 197 lbs. Note that in the SAE flareless fitting, the bite is just as effective on a solid bar as it is on the medium to heavy wall tubing for which it was designed. Compare this to light duty instrumentation fittings (one or two ferrule) which rely on mechanical swaging of the tube for holding power. In these fittings, as the wall thickness increases, less swaging action is possible making such fittings unsuitable for heavy wall tubing and high pressures.
View Complete details
Minimum Order Quantity: 50 Piece
Usage/Application | Chemical Handling Pipe |
Size | 1/2 inch, 3/4 inch, 1 inch |
Application | Structure Pipe, Gas Pipe, Hydraulic Pipe |
Material | Brass |
Head Code | Round |
Parker-Hans
View Complete details
Minimum Order Quantity: 100 Piece
Brand | Ermeto |
Usage/Application | Hardware Fitting |
Material | Brass |
Connection | Female,Male |
Packaging Type | Box |
Advantages: All pipe fitting threads are made to Dryseal standards. Connectors, unions, nuts and extruded elbows and tees are machined from CA 360 and CA 345 brass; forged elbows and tees are machined from CA 377 brass.
Specifications:
Applications:
Working Pressure and Temperature Ranges:
Vibration:
View Complete details
Minimum Order Quantity: 50 Piece
Material | SS |
Usage/Application | Structure Pipe, Gas Pipe, Hydraulic Pipe |
Size | 1/4 inch-2 inch |
Head Code | Round |
Packaging Type | Carton Box |
Brand | Parker |
Connection | Welded,Male,Female |
These Single Ferrule Bite Type Fittings are the most widely used bite type fittings in the world. These Single Ferrule Bite Type Fittings are flareless bite type metric fittings that consists of a body, progressive ring (ferrule) and nut. On assembly, two cutting edges of the ferrule “bite” into the outer surface of the tube ensuring the necessary holding power for high operating pressures.
Features:
View Complete details
Minimum Order Quantity: 50 Piece
Application | Gas Pipe, Structure Pipe, Hydraulic Pipe |
Material | SS |
Size | 2 inch-3 inch |
Shape | Hexagonal |
Brand | Parker |
These Single Ferrule Bite Type Fittings are the most widely used bite type fittings in the world. These Single Ferrule Bite Type Fittings are flareless bite type metric fittings that consists of a body, progressive ring (ferrule) and nut. On assembly, two cutting edges of the ferrule “bite” into the outer surface of the tube ensuring the necessary holding power for high operating pressures.
Features:
View Complete details
Usage/Application | Structure Pipe,Gas Pipe,Hydraulic Pipe,Chemical Fertilizer Pipe |
Material | SS |
Size | 1/2, 3/4, 1 inch |
Brand | Parker |
Head Code | Hexagonal |
Packaging Type | Carton Box |
View Complete details
Minimum Order Quantity: 50 Piece
Material | Stainless Steel |
Usage/Application | Structure Pipe, Gas Pipe, Hydraulic Pipe, Chemical Fertilizer Pipe, Pneumatic Connections |
Size | 1/2 inch, 3/4 inch, 1 inch |
Brand | Parker |
Working Temperature | -40 Deg C To 100 Deg C |
Packaging Type | Carton Box |
Parker offers fittings that provide leak free solutions. Fitting styles include – hydraulic, pneumatic and instrumentation. Parker fittings generally connect a hose assembly to a port or adapter and are manufactured to meet or exceed industrial specification requirements of SAE, ISO, DIN, DOT and JIS standards.
These single ferrule bite type fittings are the most widely used bite type fittings in the world. These Single Ferrule Bite Type Fittings are flareless bite type metric fittings that consists of a body, progressive ring (ferrule) and nut. On assembly, two cutting edges of the ferrule “bite” into the outer surface of the tube ensuring the necessary holding power for high operating pressures.
Features:
View Complete details
Material | SS |
Size | 3/4 inch |
Application | Structure Pipe |
Pack Type | Box |
Working Pressure | 6000 psi |
Parker’s triple-lok 37° flare tube fittings have been used in industry since mr. Parker pioneered the product in the 1930s. The 37° flare fitting is the most popular industrial tube/hose fitting connection in the world. Today, parker offers a broad range of triple-lok fittings meeting sae j514, iso 8434-2 and military standards and specifications. The triple-lok design is quite simple. The tube fitting consists of three pieces: the body, the nut and the sleeve. The tube end is flared at a mating 37° angle and sandwiched between the fitting nose (seat) and the sleeve creating an effective seal between the fitting nose and tube flare or hose. Parker’s triple-lok fittings are manufactured in steel, 316 stainless steel and brass for optimum fluid compatibility and corrosion resistance. Furthermore, available sizes range from 1/8" tube o. D. To 2" tube o. D. In several configurations. Adaptability to global ports is another key benefit of triple-lok. (standard ports include: sae, straight thread iso-6149, npt, bspt, bspp and din. ) The triple-lok tube fitting is also readily available for metric tubing and hose adapter applications. Simply by changing the industry standard sleeve, the same triple-lok body can be adapted to metric tubing in sizes ranging from 6 mm tube o. D. To 38 mm tube o. D. Likewise, by using only the body without the nut and sleeve, the triple-lok fitting is used as an industry standard hose adapter.
View Complete details
Minimum Order Quantity: 50 Piece
Size | 3/4 inch |
Application | Structure Pipe |
Head Code | Hexagonal |
Brand | Parker |
Material | Carbon Steel |
Technics | Forged |
View Complete details
Size | 3/4 inch, 1 inch, 1/2 inch |
Application | Hydraulic Pipe, Chemical Fertilizer Pipe, Pneumatic Connections |
Material | Stainless Steel |
Parker Fittings
Parker offers fittings that provide leak free solutions. Fitting styles include – hydraulic, pneumatic and instrumentation. Parker fittings generally connect a hose assembly to a port or adapter and are manufactured to meet or exceed industrial specification requirements of SAE, ISO, DIN, DOT and JIS standards.
These Single Ferrule Bite Type Fittings are the most widely used bite type fittings in the world. These Single Ferrule Bite Type Fittings are flareless bite type metric fittings that consists of a body, progressive ring (ferrule) and nut. On assembly, two cutting edges of the ferrule “bite” into the outer surface of the tube ensuring the necessary holding power for high operating pressures.
Features:
View Complete details
Minimum Order Quantity: 50 Piece
Size | 1/2 inch,3/4 inch,1 inch |
Type | Brass, Copper, Iron |
Application | Structure Pipe,Gas Pipe,Hydraulic Pipe,Chemical Fertilizer Pipe,Pneumatic Connections |
Additional Information:
View Complete details
Minimum Order Quantity: 50 Piece
Product Brochure
Material | SS |
Application | Structure Pipe |
Size | 1/4 |
Brand | Ermeto |
Packaging Type | Box |
Technics | Forged |
The new EO-3® tube fitting system from Parker Hannifin Corporation, global in motion and control technologies, utilizes new thread technology and a unique marking system to decrease installation time and cut down on tube system leaks due to improper installation. In contrast to Parker EO and EO-2 DIN standard fittings, the EO-3 system is based on a 24-degree inner cone with an integrated soft seal and cone-shaped connecting thread that improves sealing compatibility.
In addition, when a yellow signal ring is aligned, the installer can immediately see that the fitting has been installed correctly. Because of these features, EO-3 fittings can be installed considerably more quickly than conventional fitting systems. The EO-3 installation does not require a torque wrench or a wrench extension. For ease of installation in tight construction spaces, EO-3 fittings use an octagonal screw nut in tube sizes 25 mm and up instead of a standard hexagonal screw nut. The new EO-3 system is being demonstrated in the Parker exhibit at IFPE 2014, booth S-80440. EO-3 fittings meet the demands of applications that require both flexible hose connections and rigid tube work. They can link to existing EO-2 connections using an adapter, meaning that old fittings can be converted or upgraded at little additional cost.
The EO-3 Fitting System can be used in Applications Such as:
Additional Information:
View Complete details
Minimum Order Quantity: 10 piece
Packaging Type | Box |
Head Shape | Round |
Usage/Application | Industrial |
Finishing | Polished |
Material | Aluminium |
Parker SAE Aluminum Fittings Specify SAE aluminum fittings from Parker when your application requires corrosionresistant,lighter weight components that function reliably in a variety of environments. Approximately65% lighter than comparable steel and stainless steel fittings,Parker aluminum fittings provide considerable weight savings.When utilized in mobile hydraulic systems, lighter weight aluminum fittings reduce the overall vehicle weight, making an increase in vehicle payload possible. And lightweight aluminum fittings offer the added benefits of reduced fuel expenses and freight costs. Parker’s aluminum fittings are manufactured with an anodized coating for improved corrosion resistance.
This resistance to corrosion is superior to that of comparable steel fittings, making Parker aluminum fittings ideal for many different applications where lightweight construction – as well as high corrosion resistance – is needed. Simple system conversion Designing Parker’s aluminum fittings into an existing system is simple. Parker’s Triple-Lok (JIC) and Seal-Lok (ORFS) fittings meet the dimensional standards for SAE J514 and SAE J1453 respectively. No system re-design is necessary and conversion costs are minimized. Available in sizes -4 (1/4") through -16 (1"), the maximum working pressures range from 1500 psi to 3800 psi for Triple-Lok (JIC) and from 1500 psi to 4000 psi for Seal-Lok (ORFS) aluminum fitting.
Major Benefits:
Lightweight Up to 65% lighter than comparable steel and stainless steel fittings, reducing energy and freight expenses, as well as increasing vehicle payload.Superior corrosion resistance Superior corrosion resistance to salt spray than comparable steel fittings (per ASTM B117) for longer service.
Easy design implementation Meets dimension standards for SAE J514 (37° Flare) and SAE J1453 (O-ring Face Seal) fittings, eliminating system re-design and minimizing conversion costs.
Superior seal retention in O-ring Face Seal groove Parker’s patented Trap-Seal, with its trapezoidal shape, prevents seal pop out associated with round o-rings, reducing the risk of seal damage and leakage.
Superior seal reliability of adjustable SAE port ends Parker’s patented Robust Port Stud eliminates the existence of exposed threads between the locknut and backup washer, which can lead to backup washer damage during assembly and eventual leaks.
View Complete details
Minimum Order Quantity: 10 piece
Size | 3/4 |
Application | Hydraulic Pipe, Structure Pipe, Gas Pipe |
Condition | New |
The bite type fitting was designed by Ermeto in Germany in the early 1930’s. Ermeto-fittings soon became popular due to the simple assembly which basically just requires two wrenches. Today, the EO fitting is the most widely used bite-type fitting in the world. EO fittings are designed for metric tube. All threads, hexagons, bores and other dimensions are purely metric. Historically it is based on German national standards 2353, DIN 3861, DIN 3859 and DIN 2353, which today are represented in the international standards ISO 8434. EO fittings are recognised for the high pressure performance from a compact body. EO fittings are available in the three series for low, medium and high pressures (LL, L and S-Series). This allows cost savings and -space minimized solutions for each specific application.
New Generation:
High performance tube fittings
The new, chromium6-free fitting generation from Parker Ermeto is called EO-Plus for metallic sealed connections, EO2-Plus for Dry Technology systems and EO2-FORM for formed tube soft-sealed systems without cutting rings. The new generation is characterised by maximum safety even under extreme pressures of up to 800 bar nominal pressure. The further development of the proven Dry Technology EO-2 concept is designated EO2-Plus and gives extremely high pressure ratings and greatly reduced tightening torques for the larger fitting sizes. EO2-FORM is the new high pressure tube connection from Parker Ermeto. This concept unites the advantages of welded connections with those of EO-2 technology proven worldwide in millions of applications.
The New Generation from Parker Ermeto clearly exceeds the performance requirements of DIN/ISO standards: with its guaranteed 4-fold design factor, the new fitting generation can be used at the following nominal pressures in steel:
View Complete details
Minimum Order Quantity: 50 Piece
Material | Brass |
Size | 1/4 inch-1 inch, 1 inch-2 inch, 2 inch-3 inch |
Application | Hydraulic Pipe, Structure Pipe, Gas Pipe |
Brand | Parker |
Pressure | 500 Bar |
Pack Type | Box |
Parker fittings generally connect a hose assembly to a port or adapter and are manufactured to meet or exceed industrial specification requirements of SAE, ISO, DIN, DOT and JIS standards.
Fittings from Parker are available in a variety of styles including:As one of the leading Hose fitting adapters and clamps traders in Delhi, we make sure to serve to the diverse hose fitting, adapters and clamps requirements of the customers.
View Complete details
Minimum Order Quantity: 25 Piece
Usage/Application | Hydraulic Pipe |
Type | Adapters |
Thread Size | NPT |
Design | Standard |
Brand | Parker |
Size | 2 inch |
Connection Type | Female, Welded, Male |
Pack Type | Box |
Pressures | up to 7500 psi |
Material | Carbon Steel |
Parker''s 37° Flare JIC tube fittings and adapters, Triple-Lok®, meet the requirements of both SAE J514 and ISO 8434-2 and offer the industry''s broadest offering of port ends. The design has a small metal to metal seal area which results in a compact design, low assembly torque, high temperature and high pressure capability.
Markets:
Features/Benefits:
Applications:
View Complete details
Minimum Order Quantity: 10 Piece
Usage/Application | Hydraulic,Pneumatic |
Type | Swivel Nut |
Reinforcement | Wire |
Size | 1 inch-2 inch, 1/4 inch-1 inch |
Material | SS, MS |
Connection | Male, Female, Welded |
Brand | Parker |
Packaging Type | Box |
For more than 80 years, Parker Hannifin, the world's leading manufacturer of motion and control technology, has been developing high-pressure hydraulic fittings and setting standards globally. Over the years, new geometries and materials have improved the performance, reliabilty, and ease of installation of the original Ermeto fittings. Therefore, leakages in piping systems today cannot be ascribed to material defects, as they could be previously, but rather to improper installation. Assistance is provided in this regard by the new, quickly installable EO-3 fitting system. Its innovative form and technology raise pipe installation to a high level of quality, security, and economy.
Conical Connection Enables Seamless Installation:
Machine Pipe Forming with Proven Technology
Ability to be Combined and Flexible Employment:
Benefits of the new Concept at a Glance:
View Complete details
Minimum Order Quantity: 50 Piece
Application | Hydraulic Pipe, Structure Pipe, Gas Pipe |
Material | SS |
Size | 1 inch-2 inch, 1/4 inch-1 inch |
Head Code | Hexagonal |
Brand | Parker |
These Single Ferrule Bite Type Fittings are the most widely used bite type fittings in the world. These Single Ferrule Bite Type Fittings are flareless bite type metric fittings that consists of a body, progressive ring (ferrule) and nut. On assembly, two cutting edges of the ferrule “bite” into the outer surface of the tube ensuring the necessary holding power for high operating pressures.
Features:
View Complete details
Minimum Order Quantity: 10 Piece
Size | 1/2, 1, 2 inch |
Fitting Type | Elbow |
Usage/Application | Structure Pipe |
Material | SS |
Brand | Parker |
Finishing | Polished |
Elbow Bend Angle | 90 Degree |
Weld Nipple fittings Principle :- weld nipple fittings with an O-ring seal between weld nipple and fitting body give impressive tear out resistance and sealing integrity. Weld nipples SKA conform with DIN 3865 form A. Fitting bodies and nuts are fully interchangeable for weld nipple and for 2/progressive ring fittings of the same series and external tube diameter. Materials and surface protection: Steel phosphated and oiled, O-ring of NBR (e.g. Perbunan). Stainless steel 1.4571, O-ring of FPM (e.g. Viton) Welding suitability and weldability Weld nipples, tube bend weld nipples and ASK types made of steel are weldable according. to usual techniques. Types made of 1.4571 (stainless) are suitable for arc welding. The welding filler should be selected in accordance with DIN 8556 part 1 with consideration of the type of application and the welding technique. Tube recommendation We recommend the use of tubes in steel and stainless steel as illustrated in this catalogue. Nominal Pressure (PN) of complete weld nipple fittings The nominal working pressure (PN) of a complete weld nipple fitting is dependant upon the least rated component, i.e. tube, weld nipple or fitting. The component out of these three with the lowest rated pressure or working pressure determines the nominal pressure (PN) of the complete fitting. |
Permissible temperature range For weld nipples, tube bends with weld nipples and ASK types of steel with O-rings of 1. NBR (e.g. Perbunan): –35°C to + 100°C 2. FPM (e.g.viton): –25°C to + 200°C without pressure reductions For temperature range and necessary pressure reductions for weld nipples, weld nipple fittings and ASK types of 1.4571, see corresponding page. Fitting assembly 1. Cut off the tube square, deburr and bevel the end of the tube in conformance with DIN 2559. 2. Slide nut onto the weld nipple. 3. Weld nipple to the tube according to normal welding procedure. The tube and nipple must be aligned. Before welding, please remove the nut. 4. Dress the weld on the inside and outside. 5. Fit the O-ring without twisting. The taper, the nut and the cone must all be clean. 6. Oil the nut, taper and cone and thread before assembly 7. Screw on the nut by hand. Fully tighten using a spanner with 1/4 to 1/2 turns. Make sure that the tube with the weld nipple is assembled straight and without in built stress. |
View Complete details
Minimum Order Quantity: 200 Piece
Usage/Application | Hydraulic Pipe |
Material Grade | CARBON STEEL , STAINLESS STEEL |
Type | JIC TRIPLE LOK FITTINGS |
Application | Hydraulic Pipe |
Material | CS/SS |
Brand | PARKER |
Thread Size | JIC,UNF |
62 (Dynamic Pressure)
MAXIMUM WORKING PRESSURE (BAR)621 (Dynamic Pressure)
CONNECTION TYPEFlare
MATERIALStainless Steel
SHAPE90°, Staight, and Tee
MAXIMUM WORKING PRESSURE (PSI)9000 (Dynamic Pressure)
APPLICATIONVarious
CONNECTION 3 STYLEMale 37° Flare with O-ring Seal on Nose
CONNECTION 3 TUBE O.D. (INCH)1/2, 3/8 and 1
O-RING MATERIAL90 Durometer Nitrile
INDUSTRY STANDARDSSAE J514
Additional Information:
View Complete details